50 TPH Natural Sand Screw Wash Plant Low Power Consumption Energy Saving
Working Princle:
1. When the machine works, the motor drives the impeller run slowly after being decelerated by v-belt, reducer and gear.
2. The sand enters the wash trough through feeding tank, rolls pushed by the impeller, and rubs mutually to remove the impurities covering on the surface of the sand, it breaks the water vapour which favors dewatering;
3. At the same time, the strong water flow takes the impurities away, and discharged from the overfall.
4. The clean sand is taken away by the impellers, when rising, the water drops down to the wash trough from the nets, this can both dewater the sand and save water.
5. Finally, the sand is poured into the discharge chute and finished cleaning.
Application:
Bucket sand washer is a kind of wheel washing equipment, and can clean and separate the dust and powder from the sand. Sand washing machine are mainly used in building site, gravel plant, concrete dam building site of hydro power station, etc..
Structure:
Tech specification:
| Model | Wheel Size (mm) | Max feed size (mm) | Power (KW) | Weight (t) | Capacity (t/h) | Overall dimension (mm) |
| XSD2610 | Φ2600×1000 | 10 | 5.5/7.5 | 2.6 | 20-50 | 3255×1982×2690 |
| XSD2816 | Φ2800×1600 | 10 | 11/15 | 4.2 | 30-60 | 3540×3000×2880 |
| XSD3016 | Φ3000×1600 | 10 | 15/20 | 5.5 | 50-100 | 3845×3000×3080 |
| XSD3220 | Φ3000×2000 | 10 | 15/20 | 8.3 | 60-150 | 4150×3500×3300 |
| XSD3620 | Φ3000×2000 | 10 | 15/20 | 9.8 | 80-150 | 4500×3500×3700 |
