Product Description
Working principle
The finished material of the sand washing machine directly enters the dewatering screen for dehydration. The mud water discharged from the sand washing machine enters the equipment cleaning tank, and is pumped to the high pressure separator through the bottom vacuum high pressure pump for classification and concentration. The sand mouth enters the dehydration, and other waste water, mud, powder, impurities, etc. are discharged into the return water tank through the overflow port of the high pressure separator.
Structure
Application
In the past few years, we improve our core technology, successfully produce this vertical sand recycling machine to connect bucket wheel washer directly, and make a complete sand washing system. On the basis of the original dewatering screen, cyclone installed vertical to the screen surface. According to the principle of fluid mechanics, the recovery rate is higher than ordinary type, and the solid content will controlled to lower levels from overflow waste water, to achieve higher effect of sand recycling work. Widely used in mud purification, artificial sand production line, hydro power station and sand aggregate system, glass raw material processing system and coarse slime recovery, and fine material recovery.
Tech specification
| Model | Water Consumption (m³/h) | Screen size W*L (mm) | Cyclone Model /NO.(mm) | Power (Kw) | Weight (kg) | Dimension L*W*H(mm) |
| MZ09-25 | 30-60 | 900*1800 | 250 | 12.5 | 1400 | 2000*1300*2900 |
| MZ12-30 | 50-120 | 1200*2400 | 300 | 19.5 | 2044 | 2515*1580*2930 |
| MZ15-65 | 80-160 | 1500*3000 | 300/2 | 36 | 3000 | 3327*1880*3200 |
| MZ18-100 | 150-240 | 1800*4500 | 250/4 | 52 | 7164 | 4744*2500*3200 |
| MZ24-120 | 200-300 | 2400*4500 | 300/4 | 75 | 8200 | 4744*3200*3200 |
| MZ24-180 | 40-80 | 2400*4500 | 300/6 | 89 | 8800 | 4744*3200*3200 |
Main points
- It can effectively reduce the runoff amount of the fine material; solve the problem of end product fineness modulus on the high side, stone powder content on the low side.
- The fine material can be recycled as high as 95%, with incomparable technical and economic advantages
- The machine will be assembly by our factory before complete supply; users shall inspect the machine carefully after receiving it, in order to avoid the contingent collision damage during the process of transportation.
- The installer should be familiar with the product structure, performance and technical requirements, formulate appropriate procedure in advance of the installation.
